Alice:LabNotes/2008-2-13: Difference between revisions
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
The experiment is repeated with the control sample from professor after ethanol preparation.<br> | The experiment is repeated with the control sample from professor after ethanol preparation.<br> | ||
==Step 9:Page Denaturing Gel == | |||
1. Add 40 uL Novex TBE-Urea sample buffer (2x) for single stranded DNA to 40uL oligo mix. | |||
2. Mix 0.5 uL Invitrogen 10bp ladder with 9.5 uL dH2O, 10uL 2x TBE-Urea sample buffer. | |||
3. Denature the DNA with loading dye on thermalcycler 75C for 15 min, then quickly transfer to ice, wait for 1 min. | |||
4. Use a 2D well denaturing gel, add 0.5x TBE buffer. Flush the wells very well to remove all urea. | |||
6.Pre-run the gel for 10 min at 200V, load the samples into the wells, run at 200V for 30 min. | |||
7. Stain gel with 5uL SYBR Gold in ~100 mL of TBE in clean tray. Place tray on an orbital shaker for ~5 min. | |||
Note: starting from this step, everything need to be done in the hood to avoid contamination.<br> | |||
== Step 9 continued: Purify the product == | |||
1. Prepare two gel shearing assemblies by placing a 0.5 mL tube within another 1.5 mL tube. Use G20 needle to punch a small hole at the bottom of the 0.5 mL tube. You need two assemblies for each PAGE gel. | |||
Note: Forgot to use Non-stick tube! | |||
2.Cut out the correct band (85-92 nt in this case), chop the band into small slices, split into two half and transfer each half to one shearing assembly. | |||
3. Centrifuge at top speed > 12000 rpm for 2 min to sheer the gel, remove the 0.5 mL tube. | |||
4. Add 400 uL clean 1x TE buffer in the 1.5 mL tube. Tape the tubes on a vortexer, place the vortexer in 50C incubator, shake the tubes at low speed for 1 hour. <br> | |||
[[Image:ZhangLab_2 2008-02-13 13hr 47min.jpeg]] | [[Image:ZhangLab_2 2008-02-13 13hr 47min.jpeg]] | ||
<br> | <br> | ||
the above image is the 2D well gel I ran today, as we can see, there is no bright bands above the band i cut out, that means there are no cross or wrong annealing occurred, and the sample is quite purified.<br> | the above image is the 2D well gel I ran today, as we can see, there is no bright bands above the band i cut out, that means there are no cross or wrong annealing occurred, and the sample is quite purified.<br> |
Revision as of 22:19, 27 February 2008
Experiment: Repeat the padlock with control
The experiment is repeated with the control sample from professor after ethanol preparation.
Step 9:Page Denaturing Gel
1. Add 40 uL Novex TBE-Urea sample buffer (2x) for single stranded DNA to 40uL oligo mix. 2. Mix 0.5 uL Invitrogen 10bp ladder with 9.5 uL dH2O, 10uL 2x TBE-Urea sample buffer. 3. Denature the DNA with loading dye on thermalcycler 75C for 15 min, then quickly transfer to ice, wait for 1 min. 4. Use a 2D well denaturing gel, add 0.5x TBE buffer. Flush the wells very well to remove all urea. 6.Pre-run the gel for 10 min at 200V, load the samples into the wells, run at 200V for 30 min. 7. Stain gel with 5uL SYBR Gold in ~100 mL of TBE in clean tray. Place tray on an orbital shaker for ~5 min.
Note: starting from this step, everything need to be done in the hood to avoid contamination.
Step 9 continued: Purify the product
1. Prepare two gel shearing assemblies by placing a 0.5 mL tube within another 1.5 mL tube. Use G20 needle to punch a small hole at the bottom of the 0.5 mL tube. You need two assemblies for each PAGE gel.
Note: Forgot to use Non-stick tube!
2.Cut out the correct band (85-92 nt in this case), chop the band into small slices, split into two half and transfer each half to one shearing assembly.
3. Centrifuge at top speed > 12000 rpm for 2 min to sheer the gel, remove the 0.5 mL tube.
4. Add 400 uL clean 1x TE buffer in the 1.5 mL tube. Tape the tubes on a vortexer, place the vortexer in 50C incubator, shake the tubes at low speed for 1 hour.
File:ZhangLab 2 2008-02-13 13hr 47min.jpeg
the above image is the 2D well gel I ran today, as we can see, there is no bright bands above the band i cut out, that means there are no cross or wrong annealing occurred, and the sample is quite purified.