Sam:LabNotes/Micro-manipulation/2011-4-15: Difference between revisions

From ZhangLabWiki
Jump to navigation Jump to search
>Sam Chiang
>Sam Chiang
Line 24: Line 24:


===Test of adding final washing with PBTw===
===Test of adding final washing with PBTw===
 
*Started from the DAPI-stained sample on 4-14-'11
#Separate the sample into two tubes(250uL/tube)
#Pellet stained cells at 8000rpm, 5min, RT.
#Prepare the PBTw (PBS containing 0.1% Tween20) by adding 40uL Tween20 into 40mL PBS(0.2um filtered).
#Pick up one of the samples. Using 1mL PBTw to wash cells twice. Resuspend the cell pellet in 250uL PBTw. Label the tube as "washed".
#Label the other tube as "non-washed".


==Results==
==Results==

Revision as of 01:23, 16 April 2011

Single E.coli cell micromanipulation test on 04-15-'11

Objective

  • Further improve the DAPI staining protocol

Experiment design

  • Test the following conditions:
  1. The effect of filtering the fixed E.coli (by 5um-filter)
  2. Washing and resuspend in PBTw to remove background.
  3. Using higher amount of DAPI dye.

Procedures

Test of pre-filtering the EtOH-fixed samples

  • Starting with EtOH fixed cell (stored in -80C) x2
This cell are about 100uL of OD600=1.0 E.coli, fixed in 500uL 100% EtOH for 3hr.
  1. Pellet at 5min, 8000 rpm. Wash 1X in 1mL PBS(0.2um-filtered).
    1. One of the samples was filtered through 5um-filter, and labeled as "F".
    2. The other one was labeled as "R" following the regular procedure.
  2. Resuspend in 0.5 mL PBS(0.2um-filtered). Transfer sample in a 1.7mL amber tube.
  3. Prepare DAPI working solution (5mg/mL -> 1/5 dilution with H2O to 1mg/mL).
  4. Add DAPI working solution in the E.coli
    1. Add 1uL dye for "R" tube. Add 4uL dye for the "F" tube.
  5. Incubate in on the rocking plate/Eppendorf rocking incubator at RT (25C), 400rpm for 15min.

Test of adding final washing with PBTw

  • Started from the DAPI-stained sample on 4-14-'11
  1. Separate the sample into two tubes(250uL/tube)
  2. Pellet stained cells at 8000rpm, 5min, RT.
  3. Prepare the PBTw (PBS containing 0.1% Tween20) by adding 40uL Tween20 into 40mL PBS(0.2um filtered).
  4. Pick up one of the samples. Using 1mL PBTw to wash cells twice. Resuspend the cell pellet in 250uL PBTw. Label the tube as "washed".
  5. Label the other tube as "non-washed".

Results

Comparisons of different conditions on DAPI-stained E.coli
 
File:Sam 041511-DAPI ecoli 10X-BF-annoated.png

File:Sam 041511-DAPI ecoli 10X-DAPI-annoated.png

Discussion

Next

  • The