Daniel:Notebook/ComboLock/Polyacrylamide: Difference between revisions

From ZhangLabWiki
Jump to navigation Jump to search
>Djacobse
>Djacobse
Line 85: Line 85:
|}
|}


==VA-044==
==VA-044 (Tissue)==


VA-044 is a thermal initiator for creating free radicals that is principally used in the [http://www.nature.com/nature/journal/v497/n7449/full/nature12107.html CLARITY protocol].  It is recommended to keep the mixed solution at 4C until activation.  Activation temp is approximately 37C.  I can actually find little information on VA-044 at the moment, quite a bit of my knowledge on it is empirical.  It comes in a powder.
VA-044 is a thermal initiator for creating free radicals that is principally used in the [http://www.nature.com/nature/journal/v497/n7449/full/nature12107.html CLARITY protocol].  It is recommended to keep the mixed solution at 4C until activation.  Activation temp is approximately 37C.  I can actually find little information on VA-044 at the moment, quite a bit of my knowledge on it is empirical.  It comes in a powder.
Line 139: Line 139:


|}
|}
==VA-044 (No-Tissue)==

Revision as of 22:54, 14 March 2016

Polyacrylamide Gel Recipes for Combo Lock

Back to Notebook

PA gel creation recipes.

APS and TEMED

Based on the [protocol from George Church's lab for PA Gel creation on glass slides.

This recipe is done on the Drop Seq device and involves using APS and TEMED, which is a fast reaction done at room temperature. As such, you make two different solutions, one with the acrylamide and bis monomers, the other with APS and TEMED. These are combined at the first cross-junction in the drop seq device.

Acrylamide/Bis Solution

This solution should also include sample, when using a sample. Fill the rest (after acylamide, bis, and sample) with water.

Reagent Stock Conc Final Conc Volume (uL)
Acrylamide 40% 18% (9%) 450
Acrylamide/Bis 40% (19:1) 1.9%:0.1% (0.95%:0.05%) 50
dH20     500
Total     1000

APS/TEMED Solution

Mixed at the first cross junction in the Drop Seq device (must be added before oil/droplet formation). APS/TEMED is the initializer/accelerator, and therefore must be combined as late as possible before droplet formation to prevent clogging.

Reagent Stock Conc Final Conc Volume (uL)
Ammonium Persulfate 5% 0.2% (0.1%) 40
TEMED 100% 0.2% (0.1%) 2
dH20     958
Total     1000

VA-044 (Tissue)

VA-044 is a thermal initiator for creating free radicals that is principally used in the CLARITY protocol. It is recommended to keep the mixed solution at 4C until activation. Activation temp is approximately 37C. I can actually find little information on VA-044 at the moment, quite a bit of my knowledge on it is empirical. It comes in a powder.

Reagent Stock Concentration Final Concentration Amount added
Acrylamide 40% 3% 3 mL
Acrylamide:Bis (19:1) 40% (38:2) 0.95:0.05 (%) 1 mL
VA-044 ----- 0.25% (m/v) 0.1 g
PBS 10X 1X 4 mL
PFA 16% 4% 10 mL
nfH2O ----- ----- 22 mL
Total     40 mL

VA-044 (No-Tissue)