Daniel:Notebook/HiResChrPaint/2014-1-8: Difference between revisions
Jump to navigation
Jump to search
>Djacobse |
>Djacobse |
||
Line 154: | Line 154: | ||
5. [[Daniel:Protocols/Qiaquick_Column|Column Purification]], elute with 40 uL EB | 5. [[Daniel:Protocols/Qiaquick_Column|Column Purification]], elute with 40 uL EB | ||
6. Measure concentrations in nanodrop | 6. Measure concentrations in nanodrop | ||
===qPCR Results=== | |||
===Nanodrop Results=== |
Revision as of 01:32, 9 January 2014
Alu Control
Following the results from December 18, it appears that my primers work. However, I used up all the sample from the previous primary amplification, so I'll have to re-amplify from genomic DNA (see Genomic DNA Extraction Results).
Expansion qPCR
1. Reaction table
gDNA | 2X Kapa SYBR qPCR MM | 100 uM AP1Alu | 100 uM AP2Alu | H20 | Total Volume | |
per rxn | 1 | 50 | 0.5 | 0.5 | 48 | 100 |
PGP1F-A (12.1X) | 12.1 | 605 | 6.05 | 6.05 | 580.8 | 1210 |
2. Aliquot 100 uL into each of 3 qPCR tubes 3. PCR protocol: i. PCR 3 min 95C ii. 95C 10 sec iii. 55C 30 sec iv. 72C 20 sec v. plate read vi. goto ii x17 vii. 72C 2 min viii. 16C hold 4. Pool 3 samples together each 5. Column Purification, elute with 40 uL EB 6. Measure concentrations in nanodrop
qPCR Results
Nanodrop Results
Sample | ALU1-A | ALU1-B | ALU1-C | ALU1-D |
ng/uL | 15.4 | 13.5 | 15 | 15.9 |
ug in 40 uL | 0.6 | 0.5 | 0.6 | 0.6 |
total | 2.4 |
qPCR Gel
1. For Each Sample: 1 uL sample, 5 uL TBE, 2 uL dye; load 7.2 uL
Lane | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Sample | 10bp ladder | Alu1-A | Alu1-B | Alu1-C | Alu1-D |
2. Run gel for 30 minutes at 220V 3. Stain 2 minutes with 3 uL SYBR gold
Gel Image
So these appear to all bee the same, and pretty similar to the gel image from 12/18. So I'm going to pool the samples and proceed with production qPCR.
Pooled sample concentration: ng/uL.
Production qPCR
1. Reaction Table
gDNA | 2X Kapa SYBR qPCR MM | 100 uM AP1V6-Am | 100 uM AP2V6 | H20 | Total Volume | |
per rxn | 1 | 50 | 0.5 | 0.5 | 48 | 100 |
PGP1F (12.1X) | 12.1 | 605 | 6.05 | 6.05 | 580.8 | 1210 |
2. Aliquot 100 uL into each of 3 qPCR tubes 3. PCR protocol: i. PCR 3 min 95C ii. 95C 10 sec iii. 55C 30 sec iv. 72C 20 sec v. plate read vi. goto ii x17 vii. 72C 2 min viii. 16C hold 4. Pool 3 samples together each 5. Column Purification, elute with 40 uL EB 6. Measure concentrations in nanodrop