Matt:LabNotes/2016-8-3: Difference between revisions

From ZhangLabWiki
Jump to navigation Jump to search
>Mzcai
mNo edit summary
>Mzcai
mNo edit summary
Line 86: Line 86:
| 4mM aa-dUTP||2
| 4mM aa-dUTP||2
|-
|-
| 100uM FISSEQ_RT primer||5
| 100uM N9 primer||5
|-
|-
| RNase Inhibitor||2
| RNase Inhibitor||2
Line 145: Line 145:
|}
|}
#Add mix to sample and incubate for 30min at 37C
#Add mix to sample and incubate for 30min at 37C
#Move sample to 60C and oven slowly decreases to 55C and held for ~24hr
#Move sample to 60C and oven slowly decreases to 55C and held for ~44hr


<!--
===Day 3===
===Day 3===
#Wash with 1X PBS twice
#Wash with 1X PBS twice
#Add 200ul (1ul 200uM FISSEQ_RCA + 199ul 2X SSC + 30% formamide) and incubate 1hr at 60C
#Add 200ul (1ul 200uM FISGA_RCA + 199ul 2X SSC + 30% formamide) and incubate 1hr at 55C
#Aspirate and wash with 2X SSC, then 1X SSC, and finally 1X PBS
#Aspirate and wash with 2X SSC, then 1X SSC, and finally 1X PBS
#Prepare RCA reaction mix on ice
#Prepare RCA reaction mix on ice
Line 170: Line 169:
|}
|}
#Add RCA mix and incubate at 30C overnight (~15hrs)
#Add RCA mix and incubate at 30C overnight (~15hrs)
 
<!--
===Day 4===
===Day 4===
#Wash with 1X PBS once
#Wash with 1X PBS once

Revision as of 20:51, 6 August 2016

DARTFISH on BA8 with and without PA Gel

  • Try 3 samples with polyacrylamide gel added at different points in protocol
  • Sample 1: No gel
  • Sample 2: Gel added after permeabilization
  • Sample 3: Gel added after RNA removal
  • Used 200nM padlock probe (twice the normal concentration)
Component Volume
40% AB 199:1 Mix 6.25
10% BSA 1
1mM Acryd/Amine Linker 6.25
H2O 33.5
5% TEMED 1
5% APS 1
BS(PEG)9 1
Total 50

Protocol

Day 1

  1. Prepare 3 plastic culture dishes with 12x17mm hole, tweezers, large plastic dish, and 50C hot plate
    • EtOH and UV sterilize
  2. Make 4% PFA in 1X PBS
    • 10ml 16% PFA + 4ml 10X PBS + 26ml H2O
  3. Take out BA8 section from -80C and dry on 50C hot plate for 3min
  4. Submerge coverslip in 5ml 4% PFA in petri dish for 15min at 37C
  5. Wash twice with cold 1X SSPE by submerging
  6. Add 0.25% TX-100 in 2XSSPE and incubate 10min at RT
  7. Wash with cold nf-H2O three times and check for degradation
  8. Add 0.01% Pepsin in 0.1N HCl and incubate for 90sec at 37C
    • 2ul 1%Pepsin + 10ul 2N HCl + 188ul H2O
  9. Wash with nf-1X PBS three times and check for degradation

To Sample 2 Only

  • Skip these steps and go to Reverse Transcription Immediately for other 2 samples
  1. Aspirate any liquid and place a glass slide with 50um spacer over the coverslip with tissue
    • Secure in plastic jig
  2. Add 50ul gel casting mix filtered and degassed
    • 5% gel with 125uM Acrydite-Amine linker and 5mM BS(PEG)9
  3. Seal in plastic bag and vacuum out air before filling with argon
  4. Let sit at RT for 30min
  5. Aspirate non-polymerized gel and wash once with 1X PBS
  6. Attach coverslip to bottom of petri dish
  7. Aspirate non-polymerized gel and wash once with 1M Tris and once with cold 1X PBS

Continue for All Samples

  1. Attach coverslip to bottom of petri dish
  2. Prepare Reverse Transcription Mix on ice and add
Components Volume
H2O 159
10X M-MuLV Buffer 20
25mM dNTP 2
4mM aa-dUTP 2
100uM N9 primer 5
RNase Inhibitor 2
M-MuLV RTase 10
Total 200
  1. Incubate 10min at 4C and then ~15hr at 37C

Day 2

  1. Wash with 1X PBS once
  2. Add 200ul cold BS(PEG)9 (4ul stock BS(PEG)9 + 196ul 1X PBS) and incubate 1hr at RT
  3. Wash with 1X PBS twice
  4. Add 1M Tris pH 8.0 and incubate 30min at RT
  5. Wash with 1X PBS twice
  6. RNA Removal
    • Add 200ul RNase Mix (20ul RNase H 10X Buffer + 2ul Riboshredder + 10ul RNase H + 168ul H2O) and incubate 1hr at 37C
  7. Wash with nf-H2O twice

To Sample 3 Only

  1. Add 50ul gel casting mix filtered and degassed
  2. Seal in plastic bag and vacuum out air before filling with argon
  3. Let sit at RT for 30min
  4. Aspirate non-polymerized gel and wash once with 1M Tris
  5. Prepare Ampligase mix on ice
    • Preheat Padlock Probes then snap cool before adding Ampligase buffer and enzyme
Component Volume
Ampligase Buffer 10
478nM 80
Ampligase 10
Total 100
  1. Add mix to sample and incubate for 30min at 37C
  2. Move sample to 60C and oven slowly decreases to 55C and held for ~24hr

To Samples 1 & 2

  1. Prepare Ampligase mix on ice
    • Preheat Padlock Probes then snap cool before adding Ampligase buffer and enzyme
Component Volume
Ampligase Buffer 10
478nM 80
Ampligase 10
Total 100
  1. Add mix to sample and incubate for 30min at 37C
  2. Move sample to 60C and oven slowly decreases to 55C and held for ~44hr

Day 3

  1. Wash with 1X PBS twice
  2. Add 200ul (1ul 200uM FISGA_RCA + 199ul 2X SSC + 30% formamide) and incubate 1hr at 55C
  3. Aspirate and wash with 2X SSC, then 1X SSC, and finally 1X PBS
  4. Prepare RCA reaction mix on ice
Component Volume
H2O 174
10X Phi29 Buffer 20
25mM dNTP 2
4mM aa-dUTP 2
Phi 29 (low conc) 2
Total 200
  1. Add RCA mix and incubate at 30C overnight (~15hrs)