Matt:LabNotes/2015-6-23: Difference between revisions

From ZhangLabWiki
Jump to navigation Jump to search
>Mzcai
>Mzcai
Line 37: Line 37:
#*M-MuLV RTase 100U/ul- 20ul
#*M-MuLV RTase 100U/ul- 20ul
#Add 200ul RT Mix to embryos and incubate for 10min at 4C and then incubate overnight at 37C
#Add 200ul RT Mix to embryos and incubate for 10min at 4C and then incubate overnight at 37C
#Wash with 1X PBS twice
 
*In tubes there is white fibrous precipitate? No way to distinguish embryos from this white stuff
 
<!--#Wash with 1X PBS twice
#Add RNase H mix and incubate 1hr at 37C
#Add RNase H mix and incubate 1hr at 37C
#*H2O - 168ul
#*H2O - 168ul
Line 43: Line 46:
#*Riboshredder - 2ul
#*Riboshredder - 2ul
#*RNase H - 10ul
#*RNase H - 10ul
-->

Revision as of 18:34, 26 June 2015

Test Mouse Embryo Pre-Processing Protocol for DARTFISH

  • For project using DARTFISH on mouse embryo to study cell lineage in cardiac development
  • They normally fix, permeabilize, and hybridize probes all in tube suspension (whole mount ISH)
    • They use 20X objective to image the whole 250um depth
      • Since we used 63X objective with 1.4 NA we probably cannot do 250um depth and will require sectioning

ISH Protocol

  • Protocol.pdf
    • Fixed, dehydrated in methanol, and stored in -20C
    • Rehydrated and permeabilized with ProK for ISH

Fixed samples

FISSEQ

  • To save padlock probes will test fixation/permeabilization sample conditions with FISSEQ
  • Will use universal probe for all rolonies (FISSEQ_Adpt Cy3?) to check
  • To image, sandwich embryo between glass slide and coverslip

Procedure

  1. Make PBT: 1X PBS + 0.1% Triton X-100
  2. Rehydrate embryo #3 and #4 in 200ul PCR tube with attached caps
    • 75% MeOH in PBT for 10min rotating
    • 50% MeOH in PBT for 10min rotating
      • Embryo may have split in two? Maybe TX-100 concentration was too high in the 50% MeOH solution and needs to be remade
    • 25% MeOH in PBT for 10min rotating
    • PBT for 10min rotating twice
  3. Wash with 1X PBS three times
  4. Make RT Mix (2X volume) on ice
    • H2O - 314ul
    • M-MuLV RT Buffer 10X - 40ul
    • dNTP 25mM- 4ul
    • aa-dUTP 2mM- 8ul
    • FISSEQ_RT primer (nonamer) 100uM - 10ul
    • RNase Inhibitor 40U/ul- 4ul
    • M-MuLV RTase 100U/ul- 20ul
  5. Add 200ul RT Mix to embryos and incubate for 10min at 4C and then incubate overnight at 37C
  • In tubes there is white fibrous precipitate? No way to distinguish embryos from this white stuff