Matt:LabNotes/2015-10-20: Difference between revisions

From ZhangLabWiki
Jump to navigation Jump to search
>Mzcai
>Mzcai
Line 83: Line 83:
| Total||100
| Total||100
|}
|}
#Add mix to sample and incubate ~1hr at 60C as oven slowly decreases to 55C and held for another ~20hr
#Add mix to sample and incubate ~1hr at 60C as oven slowly decreases to 55C and held for another ~24hr
 
===Day 3===
===Day 3===
#Wash with 1X PBS twice
#Wash with 1X PBS twice

Revision as of 20:40, 22 October 2015

DARTFISH on BA8 Sections

  • Try two samples: one without suppressor oligos and one with suppv2
  • If sample is good use suppv2 sample to compare with Gwen's RNAscope images of BA8 with 4 genes: OLFM1, PDE1A, SCL17A7, RELN

Protocol

Day 1

  1. Prepare 2 plastic culture dishes with 12x17mm rectangle hole, tweezers, large plastic dish, and 50C hot plate
    • EtOH then UV
  2. Made 40ml 4% PFA at RT
    • 10ml 16% PFA from ampule + 4ml 10X PBS + 26ml nf-H2O
  3. Take out BA8 sections (2 coverslips) from -80C and incubate on 50C hot plate for 3min
  4. Submerge coverslips in 5ml 4% PFA in 6 well culture plate for 15min at 37C
  5. Wash twice with cold 1X PBS by submerging
  6. Aspirate any liquid and attach glass to bottom of culture dish with double-sided adhesive
  7. Add cold 0.25% TX-100 in 2XSSPE and incubate 10min at RT
  8. Wash with cold nf-H2O three times
  9. Add 0.01% Pepsin in 0.1N HCl and incubate for 10min (normally 5min) at 37C
    • 2ul 1%Pepsin + 10ul 2N HCl + 188ul H2O
  10. Wash with cold 1X PBS three times
  11. Prepare 2X Reverse Transcription Mix on ice and add
Components Volume
H2O 159
10X M-MuLV Buffer 20
25mM dNTP 2
4mM aa-dUTP 2
100uM N9 5
RNase Inhibitor 2
M-MuLV RTase 10
Total 200
  1. Incubate 10min at 4C and then ~18hr at 37C

Day 2

  1. Wash with 1X PBS once
  2. Add 200ul cold BS(PEG)9 (4ul stock BS(PEG)9 + 196ul 1X PBS) and incubate 1hr at RT
  3. Wash with 1X PBS twice
  4. Add 1M Tris pH 8.0 and incubate 30min at RT
  5. Wash with 1X PBS twice
  6. RNA Removal
    • Add 200ul RNase Mix (20ul RNase H 10X Buffer + 2ul Riboshredder + 10ul RNase H + 168ul H2O) and incubate 1hr at 37C
  7. Wash with nf-H2O twice
  8. Prepare Ampligase mix on ice
    • Preheat (H2O + Padlock probes + suppv2 Oligos) or (H2O + Padlock probes) to 85C and then snap cool before adding Ampligase buffer and enzyme
  • With suppressor for more intact tissue
Component Volume
DEPC-H2O 21
Ampligase Buffer 10
Justin's Batch 7 8/31/2015 Padlock Probes 329nM]] 30.43
100nM suppv2 Oligos 28.57
Ampligase 10
Total 100
  • Without suppressor for more degraded tissue
Component Volume
DEPC-H2O 20
Ampligase Buffer 10
Justin's Batch 6 8/6/2015 Padlock Probes 166nM]] 60
Ampligase 10
Total 100
  1. Add mix to sample and incubate ~1hr at 60C as oven slowly decreases to 55C and held for another ~24hr

Day 3

  1. Wash with 1X PBS twice
  2. Add 1uM FISSEQ_ppRCA (1ul 200uM FISSEQ_ppRCA + 199ul 2X SSC + 30% formamide) and incubate 1hr at 55C
    • Preheated to 70C before adding
  3. Wash with 2X SSC once, 1X SSC once, and 1X PBS once
  4. Add RCA mix and incubate 10.5hr at 30C
Component Volume
H2O 174
10X Phi29 Buffer 20
25mM dNTP 2
4mM aa-dUTP 2
Phi 29 (low conc) 2
Total 200
  1. Wash with 1X PBS once