Daniel:Notebook/ComboLock/Devices: Difference between revisions

From ZhangLabWiki
Jump to navigation Jump to search
>Djacobse
(Created page with "=Microfluidic Devices for Combo-Lock= Back to Notebook This page details the microfluidic devices used for the Combo-lock project. I have trie...")
 
>Djacobse
Line 9: Line 9:
Some specs for the Drop Seq device from the Macosko et al 2013 paper.  Below is an image of a single device.  A chip contains several dozen of these devices.
Some specs for the Drop Seq device from the Macosko et al 2013 paper.  Below is an image of a single device.  A chip contains several dozen of these devices.


[[Image:Drop_Seq_Device.png|800 px]]
[[Image:Drop_Seq_Device.png|thumb|200 px]]


As can be seen, 4 lines are used, 3 inlets and an outlet.  Two of the inlets are aqueous, the third is oil for droplet formation.
As can be seen, 4 lines are used, 3 inlets and an outlet.  Two of the inlets are aqueous, the third is oil for droplet formation.

Revision as of 17:37, 12 March 2016

Microfluidic Devices for Combo-Lock

Back to Notebook

This page details the microfluidic devices used for the Combo-lock project. I have tried to include specifications whenever possible.

Drop Seq Device

Some specs for the Drop Seq device from the Macosko et al 2013 paper. Below is an image of a single device. A chip contains several dozen of these devices.

As can be seen, 4 lines are used, 3 inlets and an outlet. Two of the inlets are aqueous, the third is oil for droplet formation.