Matt:LabNotes/2015-10-7
Jump to navigation
Jump to search
FISSEQ on Mouse Embryo Test
- Try 2 samples: A5 (20um thickness) and A6 (26um thickness)
Protocol
- For CircLigase reaction use MnCl2 made by Justin
Day 1
- Sterilize culture dishes and tweezers with EtOH, RNaseZap, and then rinse with nf-H2O
- Attach 22mm x 22mm glass coverslips (with mounted sections) to bottom of culture dishes with 16mm diameter hole
- Use Double-sided tape: Adhesives Research IS-7876-35
- Wash tissue section twice using cold nf-H2O for 5min each
- Add 0.25% TX-100 in nf-H2O for 5min at RT
- Wash with cold nf-H2O twice
- Add 200ul 0.01% pepsin in 0.01N HCl (2ul 1%Pepsin + 1ul 2N HCl + 197ul H2O) for 10min at RT
- Wash with 2ml of cold nf-PBS three times
- Prepare 2X Reverse Transcription Mix on ice
Components | Volume |
H2O | 157 |
10X M-MuLV Buffer | 20 |
25mM dNTP | 2 |
4mM aa-dUTP | 2 |
100uM FISSEQ_RT | 5 |
RNase Inhibitor | 2 |
M-MuLV RTase | 10 |
Total | 200 |
- Incubate 10min at 4C and then ~18hr at 37C
- Parafilm each dish and then put in plastic bag with wet tissue
Day 2
- Wash with 1X PBS twice
- Dishes had small leak so had to seal with gap-filling glue
- Add 200ul BS(PEG)9 (20ul BS(PEG)9 stock + 980ul 1X PBS) and incubate 1hr at RT
- Wash with 1X PBS twice
- Quench with 1M Tris for 30min at RT
- Wash with 1X PBS twice
- RNA Removal
- Add 200ul RNase Mix (100ul RNase H 10X Buffer + 10ul Riboshredder + 50ul RNase H + 840ul H2O) and incubate 1hr at 37C
- Wash with H2O twice
- Add 200ul CircLigaseII mix and incuabate 3hr at 60C
Component | Volume |
DEPC-H2O | 640 |
CircLigase Buffer 10X | 100 |
MnCl2 50mM | 50 |
Betaine 5M | 200 |
CircLigase II (100U/ul) | 10 |
Total | 1000 |
- Wash with 1X PBS twice
- Add 200ul 0.5uM FISSEQ_RCA (5ul 100uM FISSEQ_RCA + 995ul 2X SSC + 30% formamide) and incubate 1hr at 60C
- Wash with 2X SSC + 30% formamide for 10min at 60C
- wash with 2X SSC, 1X SSC, 1X PBS once each
- Add 200ul RCA mix and incubate for 15hr at 30C
Component | Volume |
H2O | 174 |
10X Phi29 Buffer | 20 |
25mM dNTP | 2 |
4mM aa-dUTP | 2 |
Phi 29 (low conc) | 2 |
Total | 200 |
Day 3
- Wash with 1X PBS once
- Add 200ul BS(PEG)9 (20ul BS(PEG)9 stock + 980ul 1X PBS) and incubate 1hr at RT
- Wash with 1X PBS twice
- Quench with 1M Tris for 30min at RT
- Wash with 1X PBS twice
- Add 200ul 75C preheated 0.5uM FISSEQ_Adpt (Cy3) in 2X SSC + 30% formamide and incubate 10min at RT
- Wash with 2X SSC twice
- Image with Confocal
FISSEQ on BA8 for Harvard
- 1 slide with 2 sections and 1 coverslip
Day 1
- Prepare 1 plastic culture dishes with hole, tweezers, large plastic dish, slide gasket, and 50C hot plate
- EtOH and RNaseZap sterilize and rinse with nf-H2O
- Made 40ml 4% PFA at RT
- 10ml 16% PFA from ampule + 4ml 10X PBS + 26ml nf-H2O
- Take out BA8 section (1 glass slide1 and 1 coverslip1) from -80C and incubate on 50C hot plate for 3min
- Submerge coverslip1 in 5ml 4% PFA in 6 well culture plate for 15min at 37C
- Submerge glass slides in 35ml 4%PFA in 50ml tube for 15min at 37C
- Wash twice with 2X SSPE by submerging
- Aspirate any liquid and attach glass to bottom of culture dish with double-sided adhesive
- Aspirate any liquid and attach gaskets to glass slides
- Add 0.25% TX-100 in 2XSSPE and incubate 5min at RT
- Wash with nuclease-free H2O three times
- Add 0.01% Pepsin in 0.01N HCl and incubate for 5min at 37C
- 2ul 1%Pepsin + 1ul 2N HCl + 197ul H2O
- Wash with nuclease-free PBS three times
- Prepare 3X Reverse Transcription Mix on ice
Components | Volume |
H2O | 477 |
10X M-MuLV Buffer | 60 |
25mM dNTP | 6 |
4mM aa-dUTP | 6 |
100uM N9 or 100uM FISSEQ_RT | 15 |
RNase Inhibitor | 6 |
M-MuLV RTase | 30 |
Total | 600 |
- Incubate 10min at 4C and then ~13hr at 37C
- Put slide in 50ml tube with wet towel and para film around cap
- Parafilm dish and put in humidified bag with mouse E7.5
Day 2
- Wash with 1X PBS twice
- Add 200ul BS(PEG)9 (20ul BS(PEG)9 stock + 980ul 1X PBS) and incubate 1hr at RT
- Wash with 1X PBS twice
- Quench with 1M Tris for 30min at RT
- Wash with 1X PBS twice
- RNA Removal
- Add 200ul RNase Mix (100ul RNase H 10X Buffer + 10ul Riboshredder + 50ul RNase H + 840ul H2O) and incubate 1hr at 37C
- Wash with H2O twice
- Add 200ul CircLigaseII mix and incuabate 3hr at 60C
Component | Volume |
DEPC-H2O | 640 |
CircLigase Buffer 10X | 100 |
MnCl2 50mM | 50 |
Betaine 5M | 200 |
CircLigase II (100U/ul) | 10 |
Total | 1000 |
- Wash with 1X PBS twice
- Add 200ul 0.5uM FISSEQ_RCA (5ul 100uM FISSEQ_RCA + 995ul 2X SSC + 30% formamide) and incubate 1hr at 60C
- Wash with 2X SSC + 30% formamide for 10min at 60C
- wash with 2X SSC, 1X SSC, 1X PBS once each
- Add 200ul RCA mix and incubate for 15hr at 30C
Component | Volume |
H2O | 174 |
10X Phi29 Buffer | 20 |
25mM dNTP | 2 |
4mM aa-dUTP | 2 |
Phi 29 (low conc) | 2 |
Total | 200 |
Day 3
- Wash with 1X PBS once
- Add 200ul BS(PEG)9 (20ul BS(PEG)9 stock + 980ul 1X PBS) and incubate 1hr at RT
- Wash with 1X PBS twice
- Quench with 1M Tris for 30min at RT
- Wash with 1X PBS twice
- Add 200ul 75C preheated 0.5uM FISSEQ_Adpt (Cy3) in 2X SSC + 30% formamide and incubate 10min at RT
- Wash with 2X SSC twice
- Image with Confocal