Daniel:Notebook/ComboLock/2017-3-26

From ZhangLabWiki
Revision as of 23:07, 26 March 2017 by >Djacobse (Created page with "=RCA Test= Back to Calendar ==Linear Product Production-Bglii== <ol start="2"> <li>TBE gel</li> <ol type="A"> <li>Mix 64 uL TBE and 16 uL 6X ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

RCA Test

Back to Calendar


Linear Product Production-Bglii

  1. TBE gel
    1. Mix 64 uL TBE and 16 uL 6X dye
    2. Aliquot 10 uL on to parafilm per sample/ladder
    3. Add 2 uL reaction, 1 uL (10 uM) controls, and 1.5 uL ladder to appropriate aliquot
    4. File:GelLanes-20170325-LinearProduct.png
    5. Add 10 uL mix to gel lanes
    6. Run gel for 24 minutes at 230V
    7. Stain with 2 uL SYBR gold for 3 minutes
    8. Rinse and image in gel doc

File:2017-03-26-LinearProductProduction-Bglii.png

That's the right one. However, there is a ton of primer (bottom of the gel), so I'll run a ssDNA column to fix.

  1. ssDNA column
  2. Add 50 uL Binding Buffer to the sample; mix well
  3. Transfer to IIC Column and centrifuge at 14000 rpm for 1 minute; SAVE THE FLOW THROUGH
  4. Add 70 uL 100% EtOH to flow through; mix well
  5. Transfer to IC Column and centrifuge at 14000 rpm for 1 minute; discard flow through
  6. Add 400 uL Prep Buffer and centrifuge at 14000 rpm for 1 minute; discard flow through
  7. Add 700 uL Wash Buffer and centrifuge at 14000 rpm for 1 minute; discard flow through
  8. Add 400 uL Wash Buffer and centrifuge at 14000 rpm for 1 minute; discard flow through
  9. Centrifuge empty column at 14000 rpm for 2 minutes
  10. Transfer to empty 1.5mL centrifuge tube (low bind)
  11. Add 20 uL nfH2O and centrifuge at 14000 rpm for 1 minute